Category Archives: X-Carve

Projets done using the Inventables X-Carve

Mar232018

Episode 163 – How I make my 3D logos

Posted on by
Episode 163 – How I make my 3D logos

In my last episode, I made this nice walnut frame with my logo in 3D.

In this episode, I’m going to show you how I made this actual 3D logo.

While doing this video I used several programs. And here’s where you can find those programs:
Photoshop https://www.adobe.com/
Dmap2gcode http://www.scorchworks.com/
CAMotics http://camotics.org/
Gcode Simulator on line https://nraynaud.github.io/webgcode/
Universal Gcode Sender http://winder.github.io/ugs_website/

Oct92015

Episode 95 – Assembling an X-Carve

Posted on by
Episode 95 – Assembling an X-Carve

A couple of weeks ago the nice folks at Inventables asked me if I was interested in assembling one of their X-Carve and give an honest review of my experience. I accepted with pleasure and now you can see Renée and I assembling my new X-Carve.

For more information on the X-Carve from Inventables I encourage you to visit https://www.inventables.com/

Filed under Review, X-Carve | Comments Off on Episode 95 – Assembling an X-Carve